Home      Company      Products      References      Support      Download      Where to Buy      Contact Us

Support > Installation Guides > Magic Touch Add-On Kits Installation >  Add-On Kit Installation for Notebook Computer

Controller Selection
Multi Monitor Setup
Quick Guide
Troubleshooting
Driver Download
Control Panel & Utility
Warranty Information
Warranty Registration

KTMT-1214 for 12-14" notebook
KTMT-1500 for 15" notebook
KTMT-154W for 15.4" widescreen notebook
KTMT-1700W for 17" widescreen notebook

A. Mounting procedures for KTMT-1214, 1500 and 154W:

1.  Open the cover.  Remove the protective film on the touch screen and mount the touch screen to the notebook using the Velcro straps (picture 1).
2.  Buckle the horizontal straps to the back of the notebook (picture 2) and pull the two vertical straps down and adhere them to the horizontal strap (picture 3).
3.  Continue to Controller & Driver Installation.  

B. Mounting procedures for KTMT-1700W:

1. This model has a pair of hangers instead of using vertical Velcro straps.  There are 4 ways to assemble the hangers depending on the width of the notebook's top frame.

1.1.  Screw through the top 2 holes of the hangers to the frame. This mounting should be suitable for most monitors.	1.2. If the top frame of your monitor is very wide, you can drop your touch screen by screwing through the bottom 2 holes of the hangers to the frame	1.3. If the top frame of your monitor is narrow, you can turn the hanger over and screw through the top holes of the hanger to the frame.	1.4. If the top frame of your monitor is extremely narrow, turn the hanger over and screw through the bottom holes of the hanger to the frame.

2.  Adhere the Velcro pads to the bottom of the hangers. Remove the wax film from Velcro. Unbuckle the bottom Velcro straps.
3.  Align and hang the touch screen in front of the display . Press the hangers down to make the Velcro adhere to the top of the display, and buckle the horizontal straps to the back of the notebook.
4.  Continue to Controller & Driver Installation.